The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - DIY Exhaust

Black_Sheep · 07-14-2018, 01:19 PM

I used a similar kit from Summit Racing, it worked out very well. I used a cut off wheel for cutting, using a piece of masking tape around the pipe as a guide. You can fine tune the cuts with a grinder.

07-14-2018, 01:19 PM	#2
Black_Sheep Registered User Join Date: Jun 2017 Location: upper midwest Posts: 1,129	Re: DIY Exhaust - Cutting Tubing I used a similar kit from Summit Racing, it worked out very well. I used a cut off wheel for cutting, using a piece of masking tape around the pipe as a guide. You can fine tune the cuts with a grinder. __________________ Mark Brother's keeper - '58 Stepside build