Quote:
Originally Posted by SunSoaked
Nice job Curt-I'm curious how difficult it was to remove the inner skin from the door. I'm considering having the inside of my doors "line X'd" and would need to open them up to do it right.
|
It really wasn't that hard. We used a grinder all around the perimeter to the window to separate the pinch. I don't exactly remember what holds the top, where the window rubber attaches. There's no other means of fastening the skin, other than that.
A chisel and hammer to remove the spot welds on the folded over edge that is still fastened to door will be needed.
What is "line X'd"?