Quote:
Originally Posted by SCOTI
The only thing that's impacted for this conversion by ECE closing their doors is the marketed 3/4 to 1/2 ton conversion spindle. You can still just use 1/2 spindles w/the correct 1/2 ton required parts. The conversion spindle just made it easier to do...
|
Thanks SCOTI.
From all the reading I have been doing what I came up with is that I can switch from 8 to 5 lug by changing the spindle.
In order to do that I need to change the upper and lower ball joints.
The upper arm will accept the smaller C10 ball joint but the lower arm would need to be replaced cause the hole is to big for the C10 ball joint.
Sound about right?