The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Trying to get a handle on camber adjustment

**AussieinNC** · 06-04-2020, 06:36 PM

The text at this link gives a simple explanation of Caster, Camber....

https://explorationoutfitters.com/pa...0is%20positive.

"All within specs"...get a new alignment shop...if one side looks distinctly different from the other there is obviously something not right.

Here are the true GM Specs

Left Front

Camber = .5 degrees to -.7 degrees

Caster = 4.7 degrees to 2.7 degrees

Toe = -.05 degrees to .15 degrees

Right Front

Camber = -.7 degrees to .5 degrees

Caster = 2.4 degrees to 4.4 degrees

Toe = .15 degrees to -.05 degrees

06-04-2020, 06:36 PM	#2
AussieinNC Moderator Join Date: Jun 2017 Location: Cherryville, NC Posts: 2,156	Re: Trying to get a handle on camber adjustment The text at this link gives a simple explanation of Caster, Camber.... https://explorationoutfitters.com/pa...0is%20positive. "All within specs"...get a new alignment shop...if one side looks distinctly different from the other there is obviously something not right. Here are the true GM Specs Left Front Camber = .5 degrees to -.7 degrees Caster = 4.7 degrees to 2.7 degrees Toe = -.05 degrees to .15 degrees Right Front Camber = -.7 degrees to .5 degrees Caster = 2.4 degrees to 4.4 degrees Toe = .15 degrees to -.05 degrees __________________ Family and country before all others... 2006 Chevy Silverado (Daily Driver) 2012 Chevy Equinox Last edited by AussieinNC; 06-04-2020 at 06:43 PM.