Quote:
Originally Posted by Grumpy old man
Put the float back where the instructions tell you . reset the mixture to 2 turns out , Start the engine and set the fast idle screw (temporarily) to a fast idle with the choke fully open , slowly adjust mixture out until engine begins to stumble then slowly turn back in a 1/4 turn or to when it smooths out . re adjust fast idle screw and that should get you close .
Remember don't rev it too hard 292's don't like that
|
Back out the screw as in CCW back out? There isn't much noticeable stutter until I basically have the screw out completely.
Im not putting the pedal on the floorboard, im talking enough gas to get going out of the driveway.
I have the fast idle cam set on fast idle (it has the autochoke on the manifold).
Just checked the vacuum, there is none. Checked my gauge so I know its working.