Re: first time here
Welcome ...a LY6 in stock form will most likely have more hp than you'll need..stock hp around mid 360s I think and compression around 9.6:1
Unless you just want to hear the cam, the stock one is fine as well as the pistons.
Sound like the engine is already torn down..but keep in mind some of the bolts are tty and the oil pump needs shimmed
I did swap the cam on my current build to a btr stage 1 truck cam..I just wanted it for lope, not necessarily for hp..havnt cranked it yet some I'm curious how itll sound and what it does on the dyno..
Think about the bigger picture though, what trans, rear gear and tire size are you gonna run...all this needs to work together with the engine to optimize the final results
Last edited by mongocanfly; 10-21-2020 at 07:49 AM.
|