[markeb01]

The outside temp yesterday was over 50 degrees, when our youngest daughter came over and volunteered to help finish the truck! So we set to work and got 99% of it done. We finished installing the driver side rear seat bracket (she installed the under floor washers and nuts), after which we installed both seats and the driver side outside seat belt. My wife helped run the bolts down inside the cab, and she readjusted the tension on the shifter so it now works perfectly. Today we picked up some 90w lube and topped off the rear axle. All that's left now is adding 1 more gallon of trans fluid, adjusting the kick down linkage on the carb, and installing the inner seat belts to the floor mounted brackets. I also have to reinstall the rocker sill moldings. Once all that is done, I'll shoot some more photos of the finished interior in the daylight and get them posted tomorrow! Tomorrow we take it out on the road again!!