new power steering pump n bracket to delete the factory vacuum pump gives me all kinds of room for motor mounts! and one less oil leak.
drew up the shock mounts. decided to use RS9000XL shocks for the adjustability, so i hit up service and got a PDF with every shock they make listed with lengths and eye's. took a bit to go thru, but found some.
also sandblasted a factory bezel before i made a backing to mount gauges. the plate is actually CORTEN and will most likely get a clearcoat to keep that look. at this point i'm leaning towards one gps Speedhut speedo centered low, and 2 Banks iDash datalogging gauges above. can display anything and everything i'd ever want, plus datalog and tune the 12v when i start playing with it. i probably won't order those until i get the body back on the chassis for good though.
