In August 2019 I decided to rebuilt the exhaust.
The truck had the stock exhaust wich wasn't in good condition.
I also wanted a bit more growl from the exhaust instead of the whispering stock exhaust.
so a couple of flexies, v-band clamps, mufflers and a lot of hours later we ended up with this:
painted the stock manifolds:
h-pipe:
mockup under the truck:
welded up on the floor:
This is the first complete exhaust i made, a good learning project. Because it hangs to low after bagging it, I can do it all over again
I also found a deal on a set of 5 lug axles from a 1973 C10.
