Quote:
Originally Posted by Dan in Pasadena
Looks great, Bam.
How far out from the new work does the blend start? I see no indication of any work at all.
|
Let me try to explain. First its very important that you block the repaired area to the point that the edges of the repair are milky or blending into the non repaired area. If you can feel the transition with a finger nail that is to much and the repair will show when done. After that I scuffed the whole fire wall on that side to about the center of the truck with 800 grit. I then back taped and masked off the top lip of the firewall and the center of the truck. Color is about 3 inches past this primed area after three coats. So first 1 inch, 2nd coat 2inch and 3rd another inch. Than I cleared the whole masked of area.
Quote:
Originally Posted by mikebte
Ya, great work. This is my first time seeing your build. I like it, great build.
|
Thanks.