87 Fuel Sender Conversion
Since photosuckit has made a change that does not allow 3rd party hosting without paying $400 a year, I decided to redo this how to on what I did to a stock 1987 sender to use with a LS swap. This sender is for the Driver Side Tank,
Pictured are the parts for the conversion of a 1987 GM Truck fuel sender for use with an LSx engine.
Sender: Spectra Premium, Driver side tank: #FG05M (pictured) -OR- Passenger side tank: #FG05N
Fuel Pump: Bosch #69225 (same as an ACDelco EP381)
Kit includes clamps, fuel line, isolator, wiring pigtail and clamps for install.
Strainer: Spectra Premium #STR01 (required for Fuel Pump Warranty)
Fittings:
Jegs 3/8” tube to -6 Male AN Fitting (#100551) Feed Line
Earl’s 3/8” tube to -6 Male AN Fitting (#165006) Feed Line
Earl’s 5/16” tube to -6 Male AN Fitting (#165056) Return Line
(I used one Earl’s and one Jegs because of cost, I saved a few bucks & Jegs did not have the 5/16” fitting)
|