|
Re: Say it ain't so CPP Motor Mounts
Quote:
Originally Posted by CPPJEFF
Ok guys here is the skinny i will have 8 sets available next week. Guys i want to be crystal clear in saying we made these mounts to try and help members with some fit issues and i will not guarantee fit on every application as there is no way to guarantee this when putting anything aftermarket on a classic vehicle. Also on that topic i will say that if you have a set of new tubular mounts and want to exchange them i will do that. (MUST BE NEW RESELLABLE CONDITION). Also guys over the years i collected some data on headers that seem to work well for customers and they are as follows.
Hedman 69646
Hedman 69096
Doug Thorley 3004
Guys the new sheet metal mounts are made with no room for improvements we got an additional 1 1/4" clearence.
Also i worked with Doug Thorley direct and they made headers for the LS motors that work with our tubulars and would might even work better with the sheet metal mounts. The part # is THY-323Y-C
Hope this info helps!!
|
The 2 hedman part numbers are for sbc, and I didn't find a Doug Thorley part number 3004.
What are the Hooker headers in those pictures you posted a while back?
__________________
Zach
1970 Chevrolet Custom Camper K20
1971 GMC Super K2500, 12V/NV4500 swap in progress
1971 Chevrolet Custom C10
1972 Chevrolet Custom Deluxe C20, 5.3/4L60E
1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi
2004 GMC Sierra 2500HD, LB7/Allison, CCSB
2005 GMC Sierra 1500, 5.3/4L60E, CCSB
|