Quote:
Originally Posted by Chaparralman1974
Hands down, the tool I used for about 80% of the stripping was the SCT from Harbor Freight:
https://www.harborfreight.com/9-amp-...gg_q=bauer+sct
This is the same thing that Eastwood offers, but cheaper.
For the other nooks and crannies, these stripper wheels for my 4" angle grinder worked really well:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Beyond that, I used my DA with 80 grit paper to give a good tooth to the rest of the metal. I did use my pressure pot sand blaster for the door jambs and the firewall where it was hard to get around all of the protrusions. |
Thanks for these links. I just can't justify the cost of a local soda blaster so I'm gonna do my cab by hand like this!