The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1947 Panel Truck Frame swap with ’88 k2500

Second Series · 02-26-2021, 02:30 PM

Thanks 6Dof, I was fortunate to be able to salvage the bedwood as it was protected being inside the panel truck all these years. I based the shock mount location off of my ’90 chevy truck, but didn’t check the angle, I don’t know why it would change, but I’ll have a look. The driver side shock is even steeper. I read about how the two are mounted at different angles.

02-26-2021, 02:30 PM	#81
Second Series Registered User Join Date: May 2015 Location: Tukwila Washington Posts: 374	Re: 1947 Panel Truck Frame swap with ’88 k2500 Thanks 6Dof, I was fortunate to be able to salvage the bedwood as it was protected being inside the panel truck all these years. I based the shock mount location off of my ’90 chevy truck, but didn’t check the angle, I don’t know why it would change, but I’ll have a look. The driver side shock is even steeper. I read about how the two are mounted at different angles. __________________ '47 Panel to '88 K2500 Frame Swap Mechanical Speedometer Drive Solution 1947.2 1 ton Chevy Panel 1955.2 Chevy 6700 Bus/RV 1990 Chevy K1500