The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

72clearwater · 08-14-2019, 07:32 PM

Hey guys im new to the forum and the c10 world. About 4 months ago I picked up a 72 GMC swb truck original AZ truck which happened to be sitting in a backyard in Tampa. Unfortunately, it had been in a wreck and the frame was fubar... luckily I was able to find a 68 c10 frame. Game plan is lq4, T-56, terminator x. As much as I would like to do a detailed restoration, corners will likely be cut when it comes to bodywork as ill be taking the patina route. Mainly due to budget and a new baby on the way. This site has been a huge help, so please feel free to criticize or offer suggestions along the way.

Thanks - Barry

08-14-2019, 07:32 PM	#1
72clearwater Registered User Join Date: Jul 2019 Location: Clearwater Florida Posts: 6	72 GMC swb ls build Hey guys im new to the forum and the c10 world. About 4 months ago I picked up a 72 GMC swb truck original AZ truck which happened to be sitting in a backyard in Tampa. Unfortunately, it had been in a wreck and the frame was fubar... luckily I was able to find a 68 c10 frame. Game plan is lq4, T-56, terminator x. As much as I would like to do a detailed restoration, corners will likely be cut when it comes to bodywork as ill be taking the patina route. Mainly due to budget and a new baby on the way. This site has been a huge help, so please feel free to criticize or offer suggestions along the way. Thanks - Barry Attached Images