The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**KyleSeal** · 05-31-2022, 08:20 AM

Removed all of the outer rocker and inner kick panel that was pretty compromised, Im rather surprised that this area was complete, obviously very pitted. The outer rocker was actually not spot welded in place whatsoever aside from maybe 1.5

Fixed up the top plate from all the beating and spot weld cutting, kind of did a number on it. I later got it in primer and headed out to the water.

Name: IMG_0073.jpg
Views: 787
Size: 69.9 KB

Name: IMG_0073.jpg
Views: 787
Size: 69.9 KB

Name: IMG_0072.jpg
Views: 792
Size: 72.8 KB

Name: IMG_0075.jpg
Views: 781
Size: 70.9 KB

Name: IMG_0074.jpg
Views: 790
Size: 106.5 KB

05-31-2022, 08:20 AM	#67
KyleSeal Senior Member Join Date: Mar 2014 Location: Toano, VA Posts: 841	Re: My 1967 Build (Finally) Removed all of the outer rocker and inner kick panel that was pretty compromised, Im rather surprised that this area was complete, obviously very pitted. The outer rocker was actually not spot welded in place whatsoever aside from maybe 1.5 Fixed up the top plate from all the beating and spot weld cutting, kind of did a number on it. I later got it in primer and headed out to the water. __________________ "Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809