|
Re: 1987 2wd Jimmy, Project (Cheap a$$)
I mounted my front K-member tonight to the 4x4 frame. I used thin cardboard to make a temp-let of the 3 holes on the bottom of the frame. couple things I'm worried about.
the 4x4 frame was 1/4" narrower than the 2wd frame. after I cut out the very front cross-member the frame widened enough. Is this ok?
also how perfect does the k-member have to be straight. If its off 1/16" or less off from front to back make a huge difference? or can that be accounted for in the alignment.
__________________
I LIKE TRUCKS
1986 GMC Suburban Build Build link
1982 Chevy SWB 2wd Scottsdale, Build Link Sold 
1987 Jimmy Build, Project Cheap A$$ Build Link
Last edited by 68Timber; 12-14-2013 at 09:28 AM.
Reason: stack the pictures
|