The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - FAQ---LEDs

68w/sbc406 · 01-15-2007, 12:26 AM

i used a resistor for each LED because i got those resistors with the LEDs. you can go out and buy a higher wattage resistor so you would only need one then.
As for the front there will need to be diodes on the wires feeding the resistors so it wont back feed. i dont have my truck here but i do believe parking lights and turn signals are on different fuses. is that clear as mud?

PS. WERE GUYS ABLE TO SEE THE VIDEO WORK OF THE FRONT SIGNAL???
PSS. sorry for it being small

01-15-2007, 12:26 AM	#6
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	Re: LED Sidemarkers i used a resistor for each LED because i got those resistors with the LEDs. you can go out and buy a higher wattage resistor so you would only need one then. As for the front there will need to be diodes on the wires feeding the resistors so it wont back feed. i dont have my truck here but i do believe parking lights and turn signals are on different fuses. is that clear as mud? PS. WERE GUYS ABLE TO SEE THE VIDEO WORK OF THE FRONT SIGNAL??? PSS. sorry for it being small __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler Last edited by augie; 04-07-2011 at 11:01 PM.