[MDPotter]

Here are the part numbers - I just installed them. They have a preformed corner and I put that in the front top. I ended up cutting both sides though. The driver side just would not quite stay in place so I just cut it and put the ends together (no length removed). I ended up cutting about an inch off the passenger side though. It went really easy and the door seems to close pretty well. In a couple spots it was a little loose, but all you have to do is pull it off and squeeze it together a little bit and reapply. There is an extra flap on the inside that you probably don't need, but it doesn't seem to be in the way of anything so I left it.