Re: Project "Bickle" 1948 1/2 ton 4.3 4l60e
thanks guys!
in true application of the joedoh rule, he picked it up and I heard from him 20 min later. I had not replaced the flasher with an electronic flasher because it was working fine, no ultra fast blink like normal with LEDs. however that was only with the headlights OFF, as soon as you turn the lights on the turn signals quit. the factory s10 flasher has an IC chip to sense the load and if a bulb is out (what LEDs look like to electronics) it will glow the turn signal dimly and not function. so $20 and a 13 mile drive, and taking out the glovebox to install an electronic flasher (part number EP28 if you have a late model S10) and all was well.
|