|
Re: Restoring Rusty
Quote:
Originally Posted by hatzie
...If you're using the PCM controlled starter wiring from the LS donor it's probably of the order of 5-10 ma to the starter enable on the PCM and 150 ma to the relay in the fuse-relay centre....
|
Quick question for you.
Is there any problem with running these milliamp loads through the old square body switches? For example, using the stock ignition switch to trigger only relays instead of actual loads?
Reason I ask, it seems that a very small electrical load might not "spark" the gap on a crude switch. But then, if a multimeter can sense the switch, I guess a relay or the pcm should sense it as well.
__________________
1987 C6P V20 truck, 2010 LMG 5.3, AFM delete, 2010 Camaro exhaust manifolds, 1997 nv4500, 1991 np241c, hydroboost, 2005 14bff axle & driveshaft, drop-n-lock gooseneck, 4.10 gears, stock suspension, rims, and tires. Still a work in progress. Any questions or suggestions are welcome!
|