[reaper71]

Pic #1 This is the upper quarter/inner fender
I know sounds odd but this was the way these are built.

Pic #2. These are the other pieces to assemble the quarter.
B-pillar, support brace, tail light housing and rear support structure

Pic #3. These are the pieces clamped together...upper quarter,lower quarter,B-pillar,and rear support.
It's a huge puzzle to get this put together and thinking of what step is next.

Pic #4. The rear support was then drilled and held together with Cleko's

Pic #5. This odd piece fills the gap between the upper quarter and the B-pillar!
um...just make it 1 piece on the B-pillar!?

So after fighting with the assembly of the parts it finally went together.Till next time
Mark...