[cebra]

I recently put a 2.5" drop spindle, 2" springs, lowered shocks on the front along with 40 series tires on 20's. I replaced all wear items (steering and suspension) and got a quite pricey dynamic alignment. I did a 5" springs, shock relocators, new shocks, and adjustable track bar with 50 series tires on 20's in the rear. It looks really good; it is made to be a daily driver though and it rides horribly. I can feel every crack in the road, it clangs, it bangs, (both front and rear), I can't get in and out of driveways, I have maybe an inch max before I am into the bumps front and rear, I am tucking tires all around. This is all my opinion on my vehicle but I hate it and wish I had not lowered it and stuck with my 15" rallys. Now I am trying to figure out how to get it back to as stock as possible without changing the spindles and having to pull the spring relocators/adjustable track bar (because I don't have them for various reasons). Thinking 16" rallys, stock front springs on the 2.5" drop spindles, 3" rear drop springs, and new front shocks may get me closer for the least amount of money. This was all my own doing but wanted to post a differing opinion for folks that may be on the fence about lowering their trucks.