Quote:
Originally Posted by Dads79GMC
I’m a self taught gearhead. So, I know the injector bottoms out in the intake, then I slightly brought it back ever so slightly. So the end cap comes off and the injector, then should protrude through the base of the intake? Thanks Mike
|
As long as it seals on the o ring, you're good (at least from a no-leak perspective). But, in some intakes, the cap on the end of the truck injector stops it from pushing into the intake far enough to seal. So you have to remove the caps. They'll pull of with a pair of pliers.
Quote:
Originally Posted by mongocanfly
yep Jonathon...you removed the black plastic end...at least that's what you told me to do on mine....haha
|
Thanks for the reminder!