The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

67ranchhand · 10-23-2019, 09:41 PM

There are also 2 sizes of oil pans too. Was this the pan you took off the engine or is it a different one? The older pans were a little shallower at the front seal. I think 1967 was the cut off date for these pans. The later pans were a little deeper at the front seal. ( I don’t remember the measurements right now) But the gasket for this pan is a little thicker in the front. Might just be your issue. Good luck!

10-23-2019, 09:41 PM	#20
67ranchhand Registered User Join Date: Oct 2018 Location: Tiffin Ohio Posts: 74	Re: Felpro One piece oil pan gasket sbc There are also 2 sizes of oil pans too. Was this the pan you took off the engine or is it a different one? The older pans were a little shallower at the front seal. I think 1967 was the cut off date for these pans. The later pans were a little deeper at the front seal. ( I don’t remember the measurements right now) But the gasket for this pan is a little thicker in the front. Might just be your issue. Good luck!