Re: K30 Aftermarket Rim Center Cap Mod
Quote:
Originally Posted by adf5565
Has anyone modified (successfully) a center cap on an aftermarket rim to fit over a K30 Dana 60 front axle hub? I recently purchased Black Rock Series 942 Type D rims for my K30.
I am fine with leaving the caps off if needed but figured since I have them if I could cleanly make them fit I'd try it. The OEM hub caps had the center hole to fit over the hub.
If anyone has done this before and could share pictures or method you used it would be appreciated.
|
First thing I would try is contacting Black Rock and asking if they have an open cap style that fits that wheel. I looked it up, that wheel in 8x6.5 has a center bore of 5.15”, is that correct? If so, this might work: https://www.roughcountry.com/product...r-cap-usc515-o
__________________
Devin
1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt
1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050
1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350
My Introduction with my '83s History
New Daily, the '96
|