The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 12-12-2019, 12:38 PM

I did all the adjustments I could think of. I even loosened the door latch assembly screw to see if that would help. It didn't! I didn't try leaning on it though. I hope that will get it. As stated I worked 2-hrs on it yesterday and finally called it a day. It was the end of the day and I just got tired of it. I will try again another day.

12-12-2019, 12:38 PM	#4
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Locking the door???? I did all the adjustments I could think of. I even loosened the door latch assembly screw to see if that would help. It didn't! I didn't try leaning on it though. I hope that will get it. As stated I worked 2-hrs on it yesterday and finally called it a day. It was the end of the day and I just got tired of it. I will try again another day. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.