I think I finally wrapped up most of the suspension work on the front. Having tried a number of ways to resolve the wheel clearance issue on the sway bar mount I eventually had to resort to some surgery.
First I tried shaving the mounts down, but it wasn't enough clearance. Then I tried a thin wheel spacer, but again, not enough clearance. I was going to fab up a steering stop to avoid the issue, but once I saw how much turning radius I'd lose I said no to that as well.
So I relocated the way bar mount to inside the lower control arm. It wasn't pretty, but it'll do for now. Eventually I'll fab up some purpose-made relocation brackets, as right now I just cut the bracket and used what I could on the inside. I had to ensure the bracket left room to remove the lower coilover bolt, so it's not as 90* as I wanted. But then agin, the stock location wasn't straight up and down either, so I think this will be okay.
Now to go get it aligned.
