|
Re: Alternator Wiring
Quote:
Originally Posted by VetteVet
The short answer is you can't. The one wire alternators do not have the internal ability to back feed voltage to the light to allow it to illuminate during charge or discharge. It requires an exciter wire to the L terminal in the alternator.
The gauge dashes can be wired to allow the battery gauge to work with a one-wire alternator if the circuit is wired correctly.
|
Thanks. I was afraid you were going to say that.
__________________
53 Chevy 3100, SBC 355, 700R4, S10 frame, Ford 8.8 rear with 4.11 gears, front disc & rear drum brakes
|