Re: Can't measure rear end pre load, options?
I second kwmech. A 12 bolt won't specify torque on the nut because of the crush sleeve. A Dana will and I would assume an Eaton too.
But just use a 1/2" ratchet and tighten it as tight as you can get it. I HIGHLY recommend using a new pinion nut.
__________________
44 Willys MB
52 M38A1
64 Corvette Coupe
68 Camaro 'vert LT1 & TH700
69 Z/28 355 12.6's @110
69 Chevy Short Step 4 1/2"/7" drop
72 Jimmy 4WD 4spd 4" & 35's
02 GMC 2500HD 4x4 Duramax
|