Quote:
Originally Posted by Vega_67C10
Why the heck does those cab corners rust out? I just replaced both of mine, just put a coat of primer on the second one tonight. Good luck with the project.
|
i thought these would be better. this is the first one of this era i have done. there is actually like a "chamber" in there that fills with salt sprayed slime. i will be undercoating everything real well. and going the extra effort to butt fit and butt weld everything. that box patch was difficult to fit nicely. i took my time welding it to not warp it. the cab corner only took about an hour and a half to remove old and fit new. rockers should go quickly too.
with the 68 in the corner space is minimal. i think i am going to finish box paint it buff it and push it outside. before i remove doors and fenders.