The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - stripped cab then repairs and epoxy primer questions

dracko · 08-26-2019, 07:23 PM

Well at $30/can it would likely cost you a fortune, lol. I did use that SprayMAX 2K epoxy aerosol once on a rocker panel because I was out of SPI. It seemed to work fine and cured as it should. Just make sure it’s a true 2K with the button plunger to release the activator.

But if you’re doing your whole truck 2 gallons is what you’ll need. 1 gallon of each part.

08-26-2019, 07:23 PM	#13
dracko Registered User Join Date: Jan 2010 Location: Regina, SK Posts: 804	Re: stripped cab then repairs and epoxy primer questions Well at $30/can it would likely cost you a fortune, lol. I did use that SprayMAX 2K epoxy aerosol once on a rocker panel because I was out of SPI. It seemed to work fine and cured as it should. Just make sure it’s a true 2K with the button plunger to release the activator. But if you’re doing your whole truck 2 gallons is what you’ll need. 1 gallon of each part.