Well, its going to be pretty close to the way they were removed.
I have all the 'screw in' type clips that are/were still on the moldings so most will go back on with the back screws.
However, there are a couple of holes that no longer have back access. So for those I will use the 'push-in' style in a couple of places.
On the long, upper bed moldings I will use 3M (thin) tape on the center clips to stick that to the bed...except for the front and rear hole mount points.
That said, to put some of this stuff back on requires me loosening and almost completely dropping the front, inner fenders to get the access from behind.
This includes the side 'Custom 10/Deluxe' emblems, etc.
I have removed the inner door panels to allow inside/back access to the door moldings so hopefully those ones will go relatively quickly.
Most of the original moldings were in really nice, straight, bright shape so I will be re-using them. However a couple were 'dinged' a bit so those will be replaced with new ones.
Not exactly an easy operation....but hey, I'll try go put on 2 or 3 every couple of days and see how it goes....patience will be 'key' here, lol.
Coley
