Re: 1971 C/10 to K/20 Conversion
So today I decided to take the knuckles off the dana 44 so that I can change ball joints and clean everything up for painting.. One knuckle came off in about 5 minutes with a pickle fork.. The other took me almost 2 hours. I beat on that thing like a million times and it wouldn't come loose. I finally got out my little propane torch I use to start the BBQ. And after about 2 minutes of heating. The lower ball joint came out on the first good whack. I'm buying all MOOG parts. I never want to do that again. I have broken loose many stubborn ball joints in the past, but nothing compares to this one I did today...
|