The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Trsmotrhed · 01-06-2013, 08:50 PM

Installed my LMC tank kit and recessed the top of the tank to clear lines for the Tanks Inc PA series pump. The pump needs 1 1/4" clearance from the top of tank. I only had about a 1/2". I cut out the top of the tank, made a recess plate and welded it back in. Checked for leaks and none. Was happy

. Used my mig welder with 023 wire. I'm looking at Tig Machines and may get one next month.

01-06-2013, 08:50 PM	#26
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: 63 SWB C10 LT1/4L60E Swap Installed my LMC tank kit and recessed the top of the tank to clear lines for the Tanks Inc PA series pump. The pump needs 1 1/4" clearance from the top of tank. I only had about a 1/2". I cut out the top of the tank, made a recess plate and welded it back in. Checked for leaks and none. Was happy. Used my mig welder with 023 wire. I'm looking at Tig Machines and may get one next month. Attached Images __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174