After I got the frame all welded up I figured it would be a good idea to see if it was still square and level, so off the rack it came.
Sure enough it was a little twisted, was out about 1/4" front to back. Ive never straightened a frame before but I knew I had chains somewhere and a jack, so all I needed was an anchor point of some sort. After a quick scan I saw a potential idea. I'm sure there's alot wrong with this approach but I did achieve success. Anyways here's what became of my potential idea.
So with that out of the way it was time to start making my way towards the finish. Put 'er back on the apparatus and spent the day grinding filling and sanding. Hope to be painting tomorrow
