|
Re: What tool to turn tie rod adjusting sleeve?
Quote:
Originally Posted by AirSpeed
In order to put a bolt into the end of the tie rod adjusting sleeve I would have to pop the tie rod end out of the steering arm then remove the tie rod end from the sleeve, this would defeat the purpose wouldn't it? I am trying to adjust the tie rod ends, they have opposing threads so that when the sleeve is turned the tie rod assembly gets longer or shorter depending on the direction I turn it. I need to keep the assembly together in order to test it's position until I get the truck to steer equally as possible.
|
Instead of pulling your hair out and fighting with it, you could have popped the tie rod out, removed it,handled your business w/ the adjusting sleeve and had it back together again. LOL
__________________
I love stock!
Not really into the whole bagged, squished,chopped, drooped,cut, bent,lifted,twisted,split,decked,massaged,tubbed,jacked trend. (o.k. slightly lowered is fine)
For the love of god, just drive it before you forget what the truck is supposed to look like !....LOL
|