The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**macs61** · 02-09-2019, 11:27 PM

Hi i am doing a 2 1/2 inch drop myself , back off your torsion bars all the way to take tension off them. Then tighten back up with wheels back on the ground good luck.

02-09-2019, 11:27 PM	#2
macs61 Junior Member Join Date: Jun 2018 Location: pleasanton. ca Posts: 77	Re: Drop Spindles on 1962 C10 Hi i am doing a 2 1/2 inch drop myself , back off your torsion bars all the way to take tension off them. Then tighten back up with wheels back on the ground good luck.