|
Re: Project Old Blue, 1965 C10, Rebuild Version 2010
The rewire of the '80 C10 is complete and the owner now has it back. Glad to see that one completed. Should be straight forward for him to get the LS running. Took in another LS Swap harness rework. Got about 30 minutes into it already just getting the loom and factory harness tape off on the wires.
We have named the red '86, Red Dawg. We figured out the starting issue after replacing the ignition switch, which when using a volt meter lead us to that being the issue, turns out the two fusible links at the starter where toast and the PO had made an attempt to repair, there was enough to read voltage, but the load was to much once you tried to start the truck. Got those replaced with new fusible links and the truck start fine now. The picture is the "fusible links" that the PO had repaired...
|