The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Question for the Electrical Gurus; Distributer not getting juice during cranking.

**kwmech** · 03-07-2023, 02:37 AM

I've always replaced the resistor wire at the engine compartment bulkhead connector and that's it. If no juice while cranking with the OE connection it would be the ign switch.

03-07-2023, 02:37 AM	#3
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,397	Re: Question for the Electrical Gurus; Distributer not getting juice during cranking. I've always replaced the resistor wire at the engine compartment bulkhead connector and that's it. If no juice while cranking with the OE connection it would be the ign switch.