The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Order of Operations

Peanut74 · 07-24-2020, 10:37 PM

I blasted mine first so I could make sure I could see all the areas that needed work. I'm glad I did as there was a lot of bondo filled rust areas. You can see the order I did mine if you look at my thread "order of rust repair". I basically asked the same question you are.

Ditto, find a blaster that as experience with blasting automotive panels. Found out the hard way on my 89 Toyota pickup. He overheated the metal and I now have warped panel under the side window.

07-24-2020, 10:37 PM	#5
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 590	Re: Order of Operations - Cab repair/sandblast I blasted mine first so I could make sure I could see all the areas that needed work. I'm glad I did as there was a lot of bondo filled rust areas. You can see the order I did mine if you look at my thread "order of rust repair". I basically asked the same question you are. Ditto, find a blaster that as experience with blasting automotive panels. Found out the hard way on my 89 Toyota pickup. He overheated the metal and I now have warped panel under the side window.