The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BMERDOC · 02-20-2019, 01:43 PM

Going down the sheet in order, I would like to see a bit more camber. -.25° would make me happier but if you can't get there you can't get there. I question the frame angle. If its really 2° thats fine but if its closer to 0 (mine was 0) then your caster angle numbers are going to be off by the sum off the difference. Since its front steer it needs toe out. I would rather see 1/8" total (1/16 per side).

02-20-2019, 01:43 PM	#81
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,934	Re: I Found the Magic Button! Going down the sheet in order, I would like to see a bit more camber. -.25° would make me happier but if you can't get there you can't get there. I question the frame angle. If its really 2° thats fine but if its closer to 0 (mine was 0) then your caster angle numbers are going to be off by the sum off the difference. Since its front steer it needs toe out. I would rather see 1/8" total (1/16 per side). __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!