Re: 1959 gmc ignition, starting problem
What ignition switch are you using? I have run into some that don't have power to the coil when turned to "start" relying on the bypass wire from the solenoid to carry the power to the coil when cranking and then when you let the key go back to IGN the power goes through the ballast resistor to the coil in normal manner.
If you have power to the coil with the key in the on position and none when cranking that is the issue.
You did confuse me a bit with the foot pedal start thing though. Are you still using the foot start button/pedal and a different ign switch? Or?????????????
__________________
Founding member of the too many projects, too little time and money club.
My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
|