The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Exploded or cross-section illustration of GOVERNOR for Borg Warner Overdrive?

TxCajun · 10-14-2020, 10:10 AM

Exploded or cross-section illustration of GOVERNOR for Borg Warner Overdrive?

I need ot try to repair the GOVERNOR on a transmission that I recently bought, a late 60's Saginaw 3 speed manual with R10 Borg Warner overdrive. The GOVERNOR is a later design unit where the top is secured with rivets (rather than screws) and has the smaller thread for securing it in the overdrive case.
The rivets were loose when I got it and there is some corrosion and muck inside the GOVERNOR body. An illustration would be helpful in attempting to disassemble and repair.

10-14-2020, 10:10 AM	#1
TxCajun Registered User Join Date: Sep 2017 Location: Cedar Park, Tx Posts: 209	Exploded or cross-section illustration of GOVERNOR for Borg Warner Overdrive? Exploded or cross-section illustration of GOVERNOR for Borg Warner Overdrive? I need ot try to repair the GOVERNOR on a transmission that I recently bought, a late 60's Saginaw 3 speed manual with R10 Borg Warner overdrive. The GOVERNOR is a later design unit where the top is secured with rivets (rather than screws) and has the smaller thread for securing it in the overdrive case. The rivets were loose when I got it and there is some corrosion and muck inside the GOVERNOR body. An illustration would be helpful in attempting to disassemble and repair. __________________ Wampus Cat Build: http://67-72chevytrucks.com/vboard/s...d.php?t=759550