The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - WA Blazer Visors-New-better than NOS & less $ than China

**PICKMUP** · 12-21-2019, 05:50 PM

*** Here are a few tips on installing visors onto the rods.
Mostly, be careful. Sand/smooth the rods with fine sand paper. A thin coat of lube helps, too. Press down on the visor and twist back & forth while applying pressure. Do not bend or damage the visor. Hold visors by the rod edge. Hardest part is getting the rod end to start into the sleeve.

12-21-2019, 05:50 PM	#25
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,169	Re: Blazer Visors-New-better than NOS & less $ than China *** Here are a few tips on installing visors onto the rods. Mostly, be careful. Sand/smooth the rods with fine sand paper. A thin coat of lube helps, too. Press down on the visor and twist back & forth while applying pressure. Do not bend or damage the visor. Hold visors by the rod edge. Hardest part is getting the rod end to start into the sleeve. __________________ Email: frankeham@comcast.net Phone: 360-956-7170 Last edited by PICKMUP; 01-22-2020 at 06:04 PM.