The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

EARNHARDT#3 · 10-08-2015, 07:21 PM

I was thinking about this the other day. When installing new rockers, why not cut the bottoms off and coat the inner side with POR15? They'd be protected by the POR15 and they'd also be open so they would dry out all the time and not hold moisture. You wouldn't be able to see that there's no bottom unless you looked underneath.

10-08-2015, 07:21 PM	#3
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: Stainless steel rocker panels I was thinking about this the other day. When installing new rockers, why not cut the bottoms off and coat the inner side with POR15? They'd be protected by the POR15 and they'd also be open so they would dry out all the time and not hold moisture. You wouldn't be able to see that there's no bottom unless you looked underneath. __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP