Re: new front leaf springs sitting crooked
You’re probably talking about the bracket rear of the spring on the drivers side. I had to remove mine as well when I put my lift on. It’s there for “safety”. It’s believed they it’s to keep the spring from shoving through the floorboard in a collision.
Quote:
Originally Posted by 65imp
I had the exact same problem after installing my new leafs from ORD. Driver side front sat 1.5" too high. I eventually found an old bracket that was bolted to the underside of the frame that prevented rearward travel of the longer shackle. It was not apparent when the front was jacked in the air, but as the suspension settled it would touch, then restrict settling.
Pulled it off and all was well. I am sure you have had enough eyes that you would have found it if that was your problem. I hate to admit it took me a couple weeks before I noticed it.
|
__________________
Kirk
72 Blazer CST 4wd highlander
66 Nova
|