The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Strange turn signal issue on 72 C-10

Rick Bollinger · 12-05-2020, 05:13 PM

you can check it while it is installed with a 1/4" socket and ratchet. But don't over tighten it that will twist your printed circuit. Loosen it up first then re snug.

12-05-2020, 05:13 PM	#21
Rick Bollinger Registered User Join Date: Mar 2018 Location: Colchester IL Posts: 284	Re: Strange turn signal issue on 72 C-10 you can check it while it is installed with a 1/4" socket and ratchet. But don't over tighten it that will twist your printed circuit. Loosen it up first then re snug.