[First c10]

Not sure if you can tell but I got the new pan installed. I think it was either the same or bigger than the chrome one I had. I went ahead and changed it as I didn't what any trouble with having a chrome pan on a 4wd truck that will be used.

I did have to shim the motor mount a 1/4" since the pan was to close for me to leave.

The rear trans crossmember from the 86 burb I got it and the np208 tcase has a drop of about 2". The stock 68 crossmember has a drop of 3-3 1/4" wouldn't you know that 3" is about right. of the what the original crossmember is I decided to use the burb crossmember and drop it 1". It will leave more room for the tc brace and exhaust. I will take some pictures tomorrow.