|
Re: Making The 3rd Row Adjustable
Received the 6ft piece of track and it looks great! I cut it into two 3ft sections and laid them out and did some measurements. I found something that I'll have to figure out a solution for.
In Richard's pic above the track looks like it runs straight from front to back.
But after measuring my 3rd bench mounting holes - the front two bolt holes are about 28 1/2 inches apart and the rear bolt holes are 32 1/2 inches apart. So if I use those bolt holes the track will angle in kind-of like a V - Not sure if the seat will be able to "slide" straight back and forth. Might have to make a new bolt hole?
Edit - Just realized the mount is backwards in Richards picture. That piece mounts with the bend facing to the inside and the mounting holes running with the seat frame vs what's in his picture.
|